2001 Toyota Tundra 4.7 Idle Air Control Valve

Idle air control device Throttle plate both sides if possible.

2001 toyota tundra 4.7 idle air control valve. The idle air control valve IAC controls the idle settings on the V6. When the valve is closed steering is turned the air is blocked and thus creates a sort of vacuum leak. If your idle control valve fails completely your engine may not have a source of air to properly idle resulting in your vehicle stalling.

Service type Idle Control Valve Replacement. Open the valve on the device start the vehicle and allow it to run until the engine stalls. YEAR RANGE FOR TOYOTA TUNDRA BY MODEL.

Will this require a new throttle control motor or is there other options. 1-2 of 2 Results. Turn the ball valve OFF and remove the empty can.

The MAF sensor is between the air filter and throttle body. 2000 Tundra 47 V8. Posted on May 09 2009.

I suggest a thorough cleaning of the throttle body reset the code and see if it comes back. Need to locate toyota aurioncamry iac valve. Follow the air intake to an intake manifold which sits on top of the throttle body.

Heres the diagram you need. Your Toyota Tundra Idle Control Valve should be able to open and close because if your idle control valve gets blocked with dirt and grime then the car would suffer from lessened strength and will stall at stop signs. 2015 Toyota Tundra DC SR5 57L.