2006 Toyota Tundra Maint Reqd Light

1 put the key to the ON position.

2006 toyota tundra maint reqd light. This light reminds the driver that the engine oil should be replaced as part of the Tacomas regular maintenance. 1 put the key to the ON position 2 press the mileage reset button on your cluster so it shows total mileage not trip 3 put the key to the OFF position 4 press and hold down the mileage reset button leave it pressed 5 put the key to the ON position. The owners manual says to change the engine oil but it was just changed 750 miles ago and the oil looks super clean.

Press and hold the trip meter reset button down and at the same time turn the ignition on. Heres how you get reset the MAINT REQD light. Turn the key back off.

While holding down the trip meter reset knob turn the ignition to run one position before starting engine. Turn the key onbut dont start itand make sure the odometer is showing the actual mileagenot trip A or BTurn the key back to the off positionthen press and hold the tripreset buttonContinue to hold it down and turn the key to the on positionContinue holding the tripreset button while the mileage flashes rows. Monday December 20th 2010 AT 841 PM.

If the Tacoma has been driven 5000 miles since. Yellow icons indicate an item of importance such as low fuel but are not necessarily a warning. It will also reduce wear and tear on.

Its a light that remains active permanently letting you know that you need to go for an oil change in a certified auto shop. These intervals happen at mileage or time intervals typically every 5000 miles6 months. Quick and Simple Tutorial on how to RESET the MAINTENANCE REQUIRED on Toyota Tundra XK30 XK40 XK50 1794 Limited Platinum Sr SR5 TRD Pro from year 2000-2001-2002-2003-2004-2005-2006-2007-2008-2009-2010-2011-2012-2013-2014-2015-2016-2017-2018-2019-2020.

Have the same problem. Reset Maintenance Required Light Posted on July 9 2021 by Mitch Bartlett Leave a Comment After 5000 miles the Toyota Tundra will let you know when it is due for an oil change by displaying a Maintenance Required message on the instrument panel. Heres how you get reset the MAINT REQD light.